Checking the scope of delivery

1. 1 x Machine Z4

2. 1 x Power cable

3. 1 x Network cable

---

4. 5 x Tool magazine (in the drawer)

---

5. 1 x Spindle service set

6. 1 x Collet wrench (0.9 Nm)

7. 1 x Cleaning brush

8. 1 x Interdental brush (for cleaning the nozzle plate)

9. 1 x Block holder service set

10. 1 x Drill bit for tool positions (2.8 mm)

11. 1 x Measuring pin

12. 1 x Tube of collet chuck grease (for spindle, blank holder, tool magazine holder)

13. 1 x Microfiber cloth

14. 3 x Bag with Tec Powder for cleaning the cooling liquid system (50 g per bag)

15. 1 x Calibration set:

    • 1 x Micrometer

    • 5 x Calibration blank

    • 1 x Single-tooth radius cutter (P200-R1-35)

---

16. 1 x Tank with activated carbon

17. 3 x Fine filter

18. 5 x Tool magazine insert

19. 1 x View window wiper

20. 3 x Fixing screw for the collet chuck of the blank holder

21. 5 x Tool magazine cap

---

Not shown:

• 1 x Brief machine information
• 1 x Carrying aid for transporting the machine
• 1 x Transport lock in the working chamber
• 1 x Supplement about removing the carrying aid and transport lock
• 1 x Transport protection cover in the multi-purpose drawer
• 1 x Hex key for the tool magazine release screw
• 1 x Hex key for the holder of the view window wiper

• Packing set

  • 1 x Transport box

  • 1 x Packaging cushion, multi-part

  • 1 x Transport protection cover

  • 1 x Housing protection cover

 Unpacking and positioning