Supported prefabricated abutment blanks in DentalCAM 8
Abutment holders are available for the following machines:
| Prefabricated abutment holders | E3/E4/E5 | K5/K5+ | N4/N4+ | R5 | S1/S2/S5 | Z4 |
|---|---|---|---|---|---|---|
|
DENRACLE Pre-milled |
No |
No |
Yes |
No |
No |
No |
|
Dental Direkt Prefab |
No |
No |
Yes |
No |
No |
No |
|
DESS Pre-milled |
No |
Yes |
Yes |
Yes |
Yes |
Yes |
|
Elos Accurate Pre-Milled |
No |
No |
Yes |
Yes |
Yes |
Yes |
|
GeoMedi Premill |
No |
No |
Yes |
No |
No |
Yes |
|
MEDENTIKA PreFace |
No |
Yes |
Yes |
Yes |
Yes |
Yes |
|
MIT Pre-Mill |
No |
No |
Yes |
No |
No |
No |
|
nt-trading Preform |
No |
No |
Yes |
Yes |
Yes |
Yes |
|
Organic pre-milled |
No |
No |
Yes |
No |
No |
No |
Table with supported prefabricated abutments
The following table contains information on all supported prefabricated abutment blanks.
The data in the table is based on information provided by the manufacturers. vhf does not guarantee that the information is complete and / or correct.
Filtering the prefabricated abutment data
| Required holder | Implant system | Abutment manufacturer | Abutment name | Function | Material |
|---|---|---|---|---|---|
| Required holder | Implant system | Abutment manufacturer | Abutment name | Function | Material |
