Supported prefabricated abutment blanks in DentalCAM 7
Which prefab abutments does DentalCAM support? Is there an abutment list?
The following abutment holders are currently available:
- DENRACLE Pre-milled®
- DESS Pre-milled
- MEDENTIKA PreFace®
- MIT Pre-Mill®
- nt-trading Preform®
- Dental Direkt Prefab
- Select the links above to view machine-specific installation instructions for holders and blanks.
Abutment holders are available for the following machines:
| K5 | K5+ | N4/N4+ | R5 | S1 | S2/S5 | Z4 | |
|---|---|---|---|---|---|---|---|
|
MEDENTIKA PreFace |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|
DESS Pre-milled |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
|
nt-trading Preform |
No |
No |
Yes |
Yes |
Yes |
Yes |
Yes |
|
MIT Pre-Mill |
No |
No |
Yes |
No |
No |
No |
No |
|
DENRACLE Pre-milled |
No |
No |
Yes |
No |
No |
No |
No |
|
Dental Direkt Prefab |
No |
No |
Yes |
No |
No |
No |
No |
|
Organic pre-milled |
No |
No |
Yes |
No |
No |
No |
No |
Table with supported prefab abutments
The following table contains information on all supported prefabricated abutment blanks.
The data in the table is based on information provided by the manufacturers. vhf does not guarantee that the information is complete and / or correct.
Filtering the prefabricated abutment data
| Required holder | Implant system | Abutment manufacturer | Abutment name | Function | Material |
|---|---|---|---|---|---|
| Required holder | Implant system | Abutment manufacturer | Abutment name | Function | Material |
