Looking forward to your E3

Select installation site

The installation site must meet the following criteria:

• Firm and even surface, must be able to carry the weight of the machine.
• Alternating current source.
• An operational Residual Current Device / Ground Fault Circuit Interrupter on the electric circuit of the machine.
• Machine requires an external air extraction system.
• Access to the internet and local computer network via cable.

Length of the supplied power cord: 1.8 m (6 ft)

Length of the provided Ethernet network cable: 2 m

• To avoid job interruptions, install an uninterruptible power supply (UPS), type online / VFI (IEC 62040-3, Class 1) if there are regular power failures or frequent mains voltage fluctuations.

• You will need the help of your IT specialist to integrate the machine into the network. A direct connection between machine and the CAM computer The computer that is connected to your machine and which runs dentalcam and dentalcnc. is also possible.

The technical data contains further requirements for the installation site.

Technical data

This is an excerpt. The complete technical data can be found here.

Dimensions (W/D/H)

	Unit	Value
Footprint (approx.)	mm in	286 x 268 10.2 x 10.2
Housing fully closed (approx.)	mm in	360 x 370 x 490 14.2 x 14.6 x 19.3
Minimum required space for operation (approx.)	mm in	560 x 620 x 530 15 x 25 x 21

Base system

	Unit	Value
Weight (approx.)	kg lbs	25 55
Axes – Rotational axis A		4 360°
Overvoltage category (IEC 60664-1)		II

Ambient conditions

	Unit	Value
Relative humidity		80 %, non-condensing
Ambient temperature for storage/transport	°C °F	‑20 – 60 -4 – 140
Ambient temperature for operation	°C °F	10 – 35 50 – 95
Location type		Indoor
Maximum height above mean sea level	m ft	2000 6561
Ambient air (IEC 60664-1)		Dust free, pollution degree 2
Electromagnetic radiation (IEC 61326-1)		Residential, business and commercial areas
Electromagnetic interference (IEC 61326-1)		Industrial environment

Sound emission

Operating condition	Unit	Value
Machining	dB(A)	69
All other operating conditions	dB(A)	<70

Measuring conditions	Value
Machined material	Standard dental splint (aligner)
Condition of the tools	new
Measured value	Sound pressure level (distance: 1 m)
Measurement according to	ISO 3746, accuracy grade 3

Connections

	Unit	Value
Power connector (and maximum power consumption in watts)	V AC Hz W	100 – 240 50/60 320 Glass fuse T6,3A L250V
Network connection – Speed		RJ-45 10BASE/100BASE-TX/1000BASE-T (Auto-sensing)
USB port		2 x 2.0 A 1 x 2.0B

trimcam

• CPU:

  64-bit Intel Core i CPU of the 12th generation with at least 14 cores and 20 threads (e.g. Intel Core i7-12800H)

  Alternative: 64-bit AMD Ryzen CPU with at least 8 cores and 16 threads (e.g. AMD Ryzen 7 6800H)

  General:

  • The CPU has the greatest influence on the performance of trimcam, the GPU can be ignored.

  • Desktop CPUs are often more powerful than laptop CPUs.

  • With Intel, the H and HX series are preferred. The P and U series are often installed in particularly thin laptops.

  • Laptop CPUs prior to the 10th generation from Intel did not perform satisfactorily in some tests.

• Operating system: 64-bit version of Windows® 10 or 11
• Storage device: SSD with 512 GiB
• RAM 32 GiB

• Display resolution: 1920 x 1080 (Full HD)

• A permanent Internet connection