Machine overview
Watch the video
YouTube video – When viewing this video, personal data is sent to YouTube, LLC, USA. Privacy statement
Front side of the machine
-
Start button
-
Working chamber door
-
View window to the working chamber
-
Recessed grip for opening the working chamber door
-
Chip container
Rear side of the machine
-
Main power switch
-
Power connection including glass fuse T6,3A L250V
-
2 x USB port 2.0 Type A (for future extensions)
-
1 x USB port 2.0 Type B (for future extensions)
-
Network port (Ethernet RJ-45)
Start button
The Start button is used to start and interrupt a job.
-
To activate the Start button, place a finger on it.
Do not press the button.
Working chamber door
The working chamber door locks the working chamber and protects the user from injuries during operation.
You cannot open the door when the machine is switched off or while the axes are moving.
- To open or close the working chamber door, pull it upwards or push it downwards with your hand. Use the recessed grip of the door.
Working chamber
You can insert blanks and tools into the working chamber. This is where the blanks are machined.
-
Spindle with collet chuck for picking up tools
-
Blank holder
-
LED for working chamber lighting
Colors of the working chamber lighting
|
Color |
Status |
Working chamber door |
|---|---|---|
|
Green |
The machine is ready for operation. |
unlocked |
|
White |
The machine is ready for operation. |
unlocked |
|
Blue |
|
locked |
|
Red |
A machine malfunction has occured. |
locked |
Axes
This machine has
Identification plate and serial number
The identification plate of the machine contains identifying information such as the serial number. You can find the identification plate and machine serial number at the following location:
Serial number on the identification plate (marked orange); Figure similar
