Setting STL root folder

1. Activate the root folder display with the following icon in the upper right corner of the STL import view:

• The following icon is displayed in the top right corner of the STL import view:

2. Select the following icon: 



 

• A window for selecting the root folder opens.


 

3. Select the desired folder:

   1. From the drop-down list, select the drive that contains the folder.

   2. Navigate to the required folder using the tree view.

   3. Open the folder with a double-click. It is not enough to mark the folder.

   When using the 3Shape Produce workflow, you must select the following folder:

   <ChairsideCAM-InstallationFolder>\STLimpExternal

   Example:C:\vhf\DentalCAM_8\STLimpExtern

   On Z4 machines, the installation folder The folder on your hard drive that you installed DentalCAM and DentalCNC in. is always on the C drive:

4. Select the following icon:

• The window closes. ChairsideCAM shows the path next to the label Root folder for STL files.



 

Watch the video