Applies to: DentalCAM & DentalCNC 8.09 / R5

Error code -1000 or -2000 – Error while unloading the blank

This error code can occur while the machine is unloading a blank from the working chamber into the blank magazineClosed Part of the blank changer in which you store the blanks for automatic loading..

It indicates that the blank changerClosed Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap (swivel axis) could not reach its default position.

The corresponding end switch or sensor did not send a signal.

Interactive troubleshooting guide